Yours Pipe Forming Equipment Solution Provider

   +86 18024904466
You are here: Home / Blog / Daily Maintenance of Tube Foaming Machine

Daily Maintenance of Tube Foaming Machine

Views: 0     Author: Site Editor     Publish Time: 2021-11-03      Origin: Site

The equipment is cared for through general methods such as wiping, cleaning, lubrication, adjustment, etc., to maintain and protect the performance and technical condition of the equipment.

Maintenance Requirements


Clean inside and outside the equipment, no oil on all sliding surfaces, lead screws, racks, gearboxes, oil holes, etc., no oil or air leakage at all parts, and clean chips, debris, and dirt around the equipment.


Tools, accessories, and workpieces should be placed neatly, and pipelines and lines should be organized.

Good Lubrication

Add or change the oil on time, keep oiling, no dry friction, standard oil pressure, bright oil mark, unobstructed oil path, oil quality meet requirements, oil gun, oil cup, and felt clean.


Follow the safety operation regulations, do not overload the equipment, make sure the safety protection devices of the equipment are complete and reliable, and the unsafe factors are eliminated in time.

Tube Tapering Machine-Mingying Machinery

Three-level Maintenance System

The three-level maintenance system is a maintenance and repair system that began in the mid-1960s in our country. Based on the summary of the former Soviet Union's planned pre-repair system in China's practice, it has been gradually improved and developed. It reflects the focus of China's equipment maintenance management. The change from repair to maintenance demonstrates China's equipment maintenance management progress and the more apparent maintenance management policy focusing on prevention. 

The three-level maintenance system includes daily care, primary maintenance, and secondary maintenance. The three-level maintenance system is a critical maintenance system that focuses on the operators and pays equal attention to the maintenance of the equipment. The three-level maintenance system is an effective way to rely on the masses, give full play to the enthusiasm of the masses, implement group management and group repairs, combine specialists and groups.

Daily Maintenance

The daily maintenance of the equipment is divided into daily maintenance and weekly maintenance.

Daily Routine Guarantee

The daily routine guarantee is carried out by the equipment operator on duty, earnestly doing the four things before the shift, the five attentions during the shift, and the four things after the shift.

Four Things Before the Shift

Check the drawing data and the shift record.

Wipe the equipment, lubricate and add oil as required.

Check whether the handle position and manual operation part are correct and flexible and whether the safety device is reliable.

Run at low speed to check whether the transmission is normal and whether the lubrication and cooling are smooth.

Five Attentions During the Shift

Pay attention to the running sound.

The temperature of the device

Equipment pressure, liquid level, electrical, hydraulic, and pneumatic systems

Instrument signal

Is the safety insurance regular?

Four Things After the Shift

Turn off the switch and put all handles to the zero position.

Remove iron filings and dirt, wipe off the oil stains on the guide rail surface and sliding surface of the equipment, and add oil.

Clean up the worksite, organize accessories and tools.

Fill in the shift record, and go through the shift procedure.

Weekly Routine Guarantee

Weekly maintenance is carried out by equipment operators every weekend. The maintenance time is 2 hours for general equipment and 4 hours for fine, large, and rare equipment.

For More Questions

We are an experienced manufacturer of pipe foaming machines. For further questions, please do not hesitate to contact us!

Foshan Nanhai Mingyi Machinery Factory

Miss Amy

Whatsapp/Wechat/Cellphone: +86 15815683442